A Design Magazine

A Design Magazine featuring great design, architecture, fashion, graphics and innovation from across the globe.

 

Jewelry

Discover 292 award-winning designs tagged Jewelry on A Design Magazine.

Sarah Ring

Anna-Reetta Väänänen Ring Jewelry

Sarah

Sarah is a gold ring inspired by a peony cultivar and by the actress it was named after, Sarah Bernhard. The ring appears solid and delicate at the same time, much like the flower itself. Its appearance changes depending on the viewing angle. Sarah is made from recycled 585 yellow gold using lost wax casting and goldsmith plate techniques. The flower layers were formed by dropping melted wax onto an iron sphere tool, then cast in gold, polished and joined with gold wire using only a few solders. The design combines wearable jewelry and art.

Continue reading about Sarah Ring

 
Green Angel Ring

Saedeh Sorouri Ring Jewelry

Green Angel

Green Angel is a ring inspired by the wings of angels, which appear in many cultures as symbols of protection, power and peace. The wings are formed from two natural leaves of the angel wing begonia plant. Each leaf is coated layer by layer with fine silver, then dried and fired in an oven. The base is made of 18 karat gold, which was melted, rolled, sawn and soldered by hand. The ring measures 40 by 30 by 20 millimeters, and the wings rest across the surface of the hand. Placed inside a clear box, Green Angel can also serve as a decorative object.

Continue reading about Green Angel Ring

 
Luxuriate Ring

MASOUD SERATI NOURI Ring Jewelry

Luxuriate

Luxuriate is a ring inspired by the growth of a plant from a single seed. Flexible strands begin inside the ring, pass through a gap in the body and rise about one centimetre above the wavy surface. Stones with natural cuts are combined with the strands. The shank widens gradually from 5 mm at the lower point to 13 mm at the top and can be made in any size. The ring is modelled digitally, produced by 3D printing and direct casting, and finished by hand. The strands can be adjusted by the wearer to change the appearance of the piece.

Continue reading about Luxuriate Ring

 
Blooming Folding Eyewear

Sonja Iglic Folding Eyewear Jewelry

Blooming

Sonja‘s eyewear design was inspired by blossoming flowers and early spectacle frames. Combining the organic forms of nature and the functional elements of spectacle frames the designer developed a convertible item that can be easily manipulated giving several different looks. The product was also designed with a practical folding possibility, taking as little space as possible in the carriers bag. The lenses are produced of laser-cut plexiglass with Orchid flower prints, and the frames are made manually using 18k gold plated brass.

Continue reading about Blooming Folding Eyewear

 
Tambourine Bracelet

Nardin Sabounchi Bracelet Jewelry

Tambourine

Tambourine B is a bracelet inspired by the tambourine, a percussion instrument that completes the rhythm of music. The bracelet holds a movable inner ring that shifts inside the outer ring and produces a soft sound when the wearer moves. The precise fit of the two rings makes the construction method complex. Sterling silver is used for the piece. Hand sketches were converted into digital models and printed in resin, then cast, soldered, polished and silver plated by hand. The lightweight and minimal form is intended as a symbol of life, dance and music.

Continue reading about Tambourine Bracelet

 
Silky Bracelet

Jingcheng Wu Bracelet Jewelry

Silky

In jewelry designer Richard Wu's mind, mathematics and design share a lot of similarities on many topics such as structure, space and change. The Silky Bracelet is designed based on the designer's personal understanding of math, the simultaneity of simplicity and complexity. Like this jewelry design, simple as it may look like, yet contains many subtle details aside.

Continue reading about Silky Bracelet

 
Pete Mondrian Utopia Ring

Sanaz Ghafari Ring Jewelry

Pete Mondrian Utopia

This work is a ring that has been designed in the form of modern art and based on the works of abstract painter Pete Mondrian. A ring with a ring on one finger, the middle finger, but the top plate extends up to three fingers. For this reason, thin lines are used that are not heavy. In fact, the black lines are in rectangular shapes with different sizes, and in some of these squares, yellow, red, blue and white gems are placed based on the colors of the artist's works.

Continue reading about Pete Mondrian Utopia Ring

 
The knight Jewellery

ONESWEAR Jewellery Jewelry

The knight

The Knight is a jewelry series inspired by medieval chivalry. The collection includes rings and necklaces made of 18K white gold set with diamonds. Some models use 18K black gold with sapphires, and the helmet form is set with black onyx. Elements of armor, shields, belts and swords are simplified into clean sculptural shapes. A three-dimensional sculpture process is used, from hand drawing to 3D modeling, resin testing and gold casting. Polishing, sandblasting, wire drawing and laser engraving complete each piece. The neutral style is intended to suit any wearer.

Continue reading about The knight Jewellery

 
Lilies of Wavre Jewelry Set

Olga Yatskaer Jewelry Set Jewelry

Lilies of Wavre

The Lilies of Wavre jewelry collection was inspired by the coat of arms of city of Wavre, Belgium. Its principal element is formed by three waterlilies connected with curved lines reminiscent of water herbs. The top of the piece resembles a crown. The collection is available in yellow and white gold, as well as silver. This jewelry set includes a necklace, earrings, and bracelets, available in different sizes, so that one can wear a more discreet version for everyday or a more glamorous one for special occasions.

Continue reading about Lilies of Wavre Jewelry Set

 
The Ray Brooch

Wonhee Kim Brooch Jewelry

The Ray

The Ray is a brooch inspired by a ray of sunlight appearing through the clouds on a cloudy day. The base color of the brooch is dark, as the piece uses black rhodium plated metal and a black diamond. Bright gemstones are combined with the dark base to brighten the whole piece. The pearls give a soft glow, while the diamonds add sparkle next to the dark metal. The brooch was developed as a three-dimensional digital model. The Ray measures 50 by 30 by 17 millimeters.

Continue reading about The Ray Brooch

 
Taj Bracelet

Fatima Dahmani Bracelet Jewelry

Taj

Redefining Oriental jewelry is not limited to its conventional forms, but also encompasses its aesthetics and inspirational potential. The Taj bracelet, featuring a simple geometric pattern that unfurls to reveal a mesmerizing 3D lace, encourages women to embrace their boldness and let their inner personality shine. Leveraging new 3D technologies, the design pushes the boundaries of technical innovation to offer creations with intricate and timeless patterns. The Taj bracelet is a jewel with hypnotic properties, capturing the essence of a universal heritage through its innovative design.

Continue reading about Taj Bracelet

 
Bow Tie Sandstone Fashion Accessory

Yakobium S.r.o Sandstone Fashion Accessory Jewelry

Bow Tie

Bow Tie is a wearable accessory made of sandstone. The structure of Bow Tie mimics natural rock formation and is inspired by the sandstone formations of Bohemian Paradise in the Czech Republic. Production combines sketching, three-dimensional modeling, three-dimensional printing, CNC milling and handwork. Each piece is finished by hand, so every accessory is unique. The item measures 114 x 58 x 20 millimeters and is firm yet lightweight. An adjustable pre-tied band fits almost any neck. Size, color and packaging can be customized, and handmade packaging is included.

Continue reading about Bow Tie Sandstone Fashion Accessory